Seleziona lingua:

INSTRUMENT CLUSTERS FOR

SELECT THE IMAGE CORRESPODING TO THE INSTRUMENT CLUSTER YOU’RE REPAIRING

size in mm

size in mm

size in mm

As the main board to which the SEPDISP19B display is sealed has 1 pad less compared to the display’s flat cable, the first pin on the left must be left empty (see SEPDISP19B picture).

We recommend replacing all displays of the instrument panel, to avoid visualization differences between the new display and those not replaced.

A good level of skill and soldering experience are required to replace the display.

SEPDISP19A

SEPDISP19D27

SEPDISP19B

As the main board to which the SEPDISP19F display is sealed has 1 pad less compared to the display’s flat cable, the first pin on the left must be left empty (see SEPDISP19F picture)

We recommend replacing all displays of the instrument panel, to avoid visualization differences between the new display and those not replaced.

A good level of skill and soldering experience are required to replace the display.

Attention!
The middle display SEPDISP19D24 is suitable for km/h instrument clusters only.

SEPDISP19G

SEPDISP19D24

SEPDISP19F

As the main board to which the SEPDISP19E display is sealed has 1 pad less compared to the display’s flat cable, the first pin on the right must be left empty (see SEPDISP19E picture).

We recommend replacing both sides displays of the instrument panel, to avoid visualization differences between the new display and those not replaced.

A good level of skill and soldering experience are required to replace the display

SEPDISP19E

SEI-DISP237

SEPDISP19C

As the main board to which the SEPDISP19G display is sealed has 1 pad less compared to the display’s flat cable, the first pin on the right must be left empty (see SEPDISP19G picture).

We recommend replacing all displays of the instrument panel, to avoid visualization differences between the new display and those not replaced.

A good level of skill and soldering experience are required to replace the display.

Attention!
The middle display SEPDISP19D24B is suitable for km/h instrument clusters only.

SEPDISP19G

SEPDISP19D24B

SEPDISP19H

A good level of skill and soldering experience are required to replace the display.

SEPDISP69