News
16/03/2013
Motortec Madrid 2013
Madrid event has closed its doors. Here you can find some pictures of the stand.
How to repair the car radio with defective display of Dacia Dokker, Duster, Logan, Lodgy, Sandero; Lada X-Ray, Nissan Terrano; Renault Captur, Duster, Logan, Oroch and Symbol
Watc...
Citroën Berlingo, C3, C4, C5, C8, Jumpy, Fiat Scudo, Ulysse, Lancia Phedra, Peugeot 206, 207, 3008, 307, 407, 508, 807, Expert, Partner, RCZ and Toyota Proace multifunction mo...
Problems and solutions for Volkswagen T5 California and Volkswagen T6 California central control unit
Is the Volkswagen T5 control panel knob loose or broken? Is the Volkswagen T6...
How to repair BMW 5 Series E34 dashboards (MotoMeter models) using Minitools display SEPDISP35B
Watch the video tutorial
The following guide will explain how to repair BMW 5 ...
How to repair Audi A1 instrument cluster LCD screen using Minitools part SEPFLAT44
Watch the video tutorial
The following guide will explain how to repair Audi A1 dashboa...
Minitools celebrates 1 year of video tutorials! For more than 25 years, Minitools has put customer service first, trying to be always there and to offer quick and efficient solutio...
How to repair classic car instrument clusters?
Is your classic car instrument cluster not working? Don’t worry, Minitools got that covered. At Minitools we produce and sell ...
If your instrument cluster needle is stuck or vibrates or if the speedometer needle bounces, this is usually due to a stepper motor malfunction. These problems can affect the rev c...
The Daewoo car radio screen, installed on various Nissan car models, often presents problems that can be easily solved by replacing the Nissan display not working, with a new one.
...
Several factors may cause dashboards problems on Mercedes A Class W169 and C169 (models from 2004 to 2012) and Mercedes B Class W245 (models from 2005 to 2011). The most common cau...
Volkswagen Golf mk4, mk5 and mk6 dashboards, are affected by many problems relating to LCD displays faded or needles that do not work properly.
Your first reaction to solve thes...
Minitools engineers have carefully examined problems with the malfunctioning of the reset button on Mercedes Class A and B cars dashboards, noticing that they are caused by breakag...
Problems with Ford dashboards often affect the display. If this is the case, when repairing a Ford Focus instrument cluster, you don’t need to replace the instrument cluster but ...
Is the Porsche instrument cluster not working? Is the Porsche analog odometer not spinning? Has the Porsche digital odometer stopped working? Don’t worry, Minitools has the s...
The UK automotive event organised by Messe Frankfurt ended on 6 June. It was a pleasure to meet participants who visited our stand C143 from 4 to 6 June 2019.
This was the fir...
The 28th edition of the biannual Autopromotec Bologna show has ended. A big thank you to all participants who visited the Minitools stand in Hall 21, stand C3.
We’re delighted...
Great news of 2019 is Minitools attendance at a new European event.
From the 4th to the 6th of June, we will be in Birmingham for Automechanika, the most important English event...
Autopromotec, the most important Italian trade fair for cars’ parts and tools, will open its doors from the 22nd to the 26th of May 2019 in Bologna.
In occasion of this inter...
The Minitools product range now includes the new SEPDISP36. This state-of-the-art display uses new technologies to improve the quality of information displayed and display performa...
The Minitools SEPDISP43 display adaptable to John Deere and Massey Ferguson tractors has been extended by another four displays for repairing tractor dashboards on some of th...
The 25th edition of Automechanika Frankfurt has closed its doors. The event gave us the chance to get in touch with professionals in the Automotive field and to meet our customers....
From the 17th to the 21st of October, during the most important French event, Equip Auto, in Paris, it has been possible to see the new Minitools products.
Thanks to the latest edition of the Autopromotec, we've had the chance to meet our customers and some new customers. Here there are some pictures taken during the event.
The new SiSistema service allows garages to repair dashboards just ordering from the site www.sisistema.com. Come to discover how to do it, from the 24 to the 28 maggio in Hall 21 ...
During Motortec it has been possible to introduce Minitools to the Spanish customers.
In 2017 Minitools will meet customers and technicians in the following events: MOTORTEC AUTOMECHANIKA 15 – 18 March 2017 - Madrid, AUTOPROMOTEC 24 – 28 May 2017 - Bologna, EQUI...
From the 15th to the 18 th of March, you can come to Motortec Automechanika Madrid 2017, to visit Minitools at Hall 4 Stand 4A17.
Here there are some pictures of Minitools' stand at Automechanika Frankfurt, Hall 3.0 Stand G67.
Come to see Minitools new products from the 13th to the 17th of September at Automechanika 2016 Frankfurt, Hall 3.0 Stand G67.
Minitools products at Equip Auto 2015 Paris.
From the 13th to the 17th of October, it'll be possible to meet Minitools technicians and to see the new products. Come to visit us at Hall 5 Stand N070.
Here there are some pictures of Minitools stand and of some products at ReMaTec 2015.
Pictures of the stand at Autopromotec 2015.
Some pictures of the stand at Motortec Madrid 2015.
It'll be possible to see Minitools new products during the following event: MOTORTEC Madrid from 11 to 14 March 2015 Hall 3 – Stand A10 AUTOPROMOTEC Bologna from 20 to 24 May 201...
We would like to thank all ExpoMecânica 2014 attendees, here you can find some pictures of the event.
From the 3th to the 5th of October 2014, it will be possible to get to know Minitools products at hall 6 stand B12 during ExpoMecânica 2014.
Here there are some pictures of the latest edition of Automechanika 2014, which has taken place from the 16th to the 20th of September.
Come to visit us and to see new Minitools products from the 16th to the 20th September, at Hall 3.0 stand G67 in Frankfurt.
Some pictures of the stand at the Bologna event during the 2013 edition.
Madrid event has closed its doors. Here you can find some pictures of the stand.
Come to visit us in Madrid from 13 to 16 March during the Motortec Hall 10 – Stand 10 F13, in Bologna from 22 to 24 May Hall 18 – Stand E12 during the dell'Autopromotec and in ...
Automechanika Frankfurt 2012 has terminate. This is our stand in which some Minitools products have been shown.
The new catalogue is online. it includes all new and refurbished, adaptable LCD to the following brands: Volkswagen Passat, Leon and Seat Altea, Fiat Bravo, Croma and Lancia Delta ...
From the 11th to the 16th of September, it'll be possible to visit our stands. Come to visit us at Hall 9 Stand C91 and Hall 3 Stand F65.
The new website www.eeclip.com is online.
You'll find all kind of information about the universal, serial programmer for EEprom SOP8: EEClip. It is the USB programmer with Windo...
The new LCD display adaptable to Renaul Modus, is available.
You can find all information, just reading its data sheet.
New key shells compatible with Citroën and Opel / Vauxhall are available.
To discover more go to: >> SEPRUB13 >> SEPKEY07
Discover more info about the new LCD display adaptable to Volkswagen Golf 4; Volkswagen Passat; Audi A3; Audi A4; Audi A6; Seat (some models) or Skoda (some models).
For more in...
The new SEPFLAT30 allows to electricians or mechanics, to repair Mercedes Viano o Mercedes Vito clusters.
For more information, you can look for SEPFLAT30.
Thanks to the new LCD display full of flat, it's now possible to repair Mercedes C/E/CLK/SLK .
You can have a look the data sheet: SEPDISP19A - SEPDISP19B - SEPDISP19C - SEPDISP...
We would like to share some pictures of the event in Bologna.
It's possible to buy the key shells adaptable to Citroën, Fiat, Peugeot e Lancia.
For more information go to: >> SEPKEY04 >> SEPKEY05 >>SEPKEY03B.
Check the technical schedule of the new Smart Fortwo adaptable key rubber.
Here there are some pictures of the latest edition of Motortec 2011 in Madrid. We were with our Spanish distributor Baldo Motor Sport.
From the 30th of March to the 2nd of April, will be in Madrid at Motortec Hall 6 Stand 6B26B.
The 35080 eraser allows to erase eeprom 35080 until the last generation 35160.
Discover more on SEP-ERASE35.
From 25 to 29 May, it'll be possible to see the new Minitools products at Autopromotec 2011 in Bologna.
Come to Hall 30 stand D-12.
The new speaker is compatible to many instrument clusters such as Audi A4 (Bosch model) and Volkswagen Polo.
Find more info about SEI-SPEAKER01B.
You can buy now the new rubbers adaptable to Fiat Punto, Fiat Panda and Fiat Stilo.
Discover more on the following pages: SEPRUB10B - SEPRUB10N - SEPRUB11N - SEPRUB11B.
Starting from December 2010 the new adaptable display to:
>> SEPDISP17B, display adaptable to Mercedes Viano and Mercedes Vito;
>> SEPDISP18, display with flat ad...
The new shell kit adaptable to Toyota keys is now available. It includes seven couples of adapters to fit the old "blade" to the new cover.
Find more on SEPKEY02.
Some pictures of the Minitools stand at Automechanika 2010. The event was in Frankfurt from the 14th to the 19th of September.
Minitools products will be shown during the most important world Automotive event.
From the 14th to the 19th of September you can come to see them at Hall 9 stand C91.
Link:Â...
The new shells can replace the originals when they're damaged. it's also possible to buy just the rubbers adaptable to many different models such as Fiat, Audi, Volkswagen. They ca...
Starting from March 2010, the new flat adaptable to Volkswagen GOL is available.
For more info, please click on SEPFLAT26.
During Autopromotec 2009 the new Minitools products have been shown. We share with you some pictures.
From the 27th to the 30th of May in Milan, it'll be possible to have a look to the new Minitools products.
Some pictures of Minitools products at Autopromotec in Bologna.
From the 9th to the 13th of May, during Motortec 2007, it was possible to learn more about Minitools products at hall 10 stand 10G703.
From the 23rd to the 27th of May, it'll be possible to visit the stand with products branded Minitools at hall 30 stand E27 during the Autopromotec 2007 Bologna.
From 20 to 23 September 2006 the new Videozoom was available at Hall 11 Stand C51-C53, in the new area Milano RHO Fairs – PERO.