As the main board to which the SEPDISP19B display is sealed has 1 pad less compared to the display’s flat cable, the first pin on the left must be left empty (see SEPDISP19B picture).
We recommend replacing all displays of the instrument panel, to avoid visualization differences between the new display and those not replaced.
A good level of skill and soldering experience are required to replace the display.
As the main board to which the SEPDISP19F display is sealed has 1 pad less compared to the display’s flat cable, the first pin on the left must be left empty (see SEPDISP19F picture)
We recommend replacing all displays of the instrument panel, to avoid visualization differences between the new display and those not replaced.
A good level of skill and soldering experience are required to replace the display.
Attention!
The middle display SEPDISP19D24 is suitable for km/h instrument clusters only.
As the main board to which the SEPDISP19E display is sealed has 1 pad less compared to the display’s flat cable, the first pin on the right must be left empty (see SEPDISP19E picture).
We recommend replacing both sides displays of the instrument panel, to avoid visualization differences between the new display and those not replaced.
A good level of skill and soldering experience are required to replace the display
As the main board to which the SEPDISP19G display is sealed has 1 pad less compared to the display’s flat cable, the first pin on the right must be left empty (see SEPDISP19G picture).
We recommend replacing all displays of the instrument panel, to avoid visualization differences between the new display and those not replaced.
A good level of skill and soldering experience are required to replace the display.
Attention!
The middle display SEPDISP19D24B is suitable for km/h instrument clusters only.